China China Split Repair Collar with ce certificate top quality Good price

Product Description

1. Ductile iron pipe saddle clamp for PVC/PE pipe are largely used for transferring drinkable drinking water, waste water and for irrigation.
two. Standard: ISO2531, EN545, EN598
3. Coating: FBE Epoxy powder coating.
four. Different joint method CZPT : Press-on & flange joint.
5. Materials: Ductile Iron GGG 50
six. Measurement: DN40- 400mm

one. Thoroughly clean the shaft, the interior and outer holes of the bushing, and the inner hole of the hub. Eliminate any oil, paint or filth, area the bushing on the hub, and match the 50 percent holes to make complete holes (each and every full gap will only be threaded on one particular facet). Evenly oil the threads and details of set screws or the threads and heads of cap screws. Loosely location the screws in the threaded holes on the hub facet. Make certain the bushing is cost-free on the hub. Snap the assembly onto the shaft and place it in the desired situation. Tighten the screws alternately and evenly till all are restricted 5. Hammer the massive stop of the bushing with a hammer and block or socket to avoid damage. The screw can now be turned somewhat to the specified torque setting. Repeat this alternating hammering and screw retightening until the specified torque is achieved. Fill all holes with grease to take away dust.
China China Split Repair Collar with ce certificate top quality Good price