China Ductile Iron U-Bolted Mechanical Tee for Fire Fighting FM/UL Approved with ce certificate top quality Good price

Product Description

Item Description

1.Basic Information

Material  Ductile Iron (ASTM A536 Grade sixty five-45-12)
Gasket Material   EPDM
Floor Remedy  Epoxy-(Purple)RAL3000, Epoxy-Orange, Epoxy powder painting,Scorching Galvanized,
Measurement  1″-twelve”
Operating Stress 300PSI
Cerification  ISO 9001:2008,FM,UL,CCC and CE accredited
Connect Stop Type   Grooved stop ,Thread end 
Technological innovation  Casting
Bolts and Nuts  ISO 898-1 Class8.eight
Payment  by T/T,L/C
Packaging  In poly wooden scenario,or in carton on the poly wooden pallets,we can pack goods as per custmon’s necessity.
Delivery element typically inside 15days,depending on order quantity.
Structure kind one) Rigid CZPT ,Versatile CZPT , Decreasing Versatile CZPT
2) CZPT Radius and Limited Radius Elbow (90°/45°/22.5°/11.25°)
3) Equal Tee, Grooved Minimizing Tee, Grooved Reduing Tee(Threaded outlet)
4) Grooved CZPT Tee,Grooved CZPT Cross
five) Equivalent Cross, Grooved Decreasing Cross
6) Grooved Reducer, Threaded Reducer
seven) Adapter Flange, Grooved Break up Flange
8) Cap,End Cap

two.Measurement and Spec

Nominal Dimensions mm/in Pipe O.D mm/in Working Stress PSI/MPa Bolt Size  Dimensions mm/in Gap cuting dimensions
No.-Dimension mm A B C mm/in
twenty five*15    33.7*21.3 300 M10 85 fifty 50 24
1*½ one.375*.839 2.07 three.346 1.969 1.969 .945
25*20      33.7*26.9      300 eighty five fifty 50 24
one*¾ one.327*1.059 2.07 three.346 one.969 1.969 .945
32*15     42.4*21.3      three hundred 91 41 58 thirty
1¼*½ 1.669*.839 2.07 3.583 one.614 2.283 1.181
32*20 forty two.4*26.nine 300 91 44 fifty eight 30
1¼*¾ 1.669*1.059 2.07 3.583 1.732 2.283 1.181
32*twenty five 42.4* three hundred ninety one fifty 58 30
1¼*one one.669*1.327 2.07 3.583 one.969 2.283 1.181
forty*15     forty eight.3*21.3 300 91 forty five fifty eight thirty
1½*½ one.900*.839 two.07 3.583 1.772 two.283 one.181
forty*twenty forty eight.3*26.9 three hundred ninety one 51 58 30
1½*¾ 1.900*1.059 two.07 three.583 two.008 two.283 one.181
40*25 forty eight.3* 300 91 55 fifty eight thirty
1½*1 1.900*1.327 two.07 3.583 two.165 2.283 1.181
50*fifteen    60.3*21.three 300 ninety five 53 fifty eight 30
two*½ two.375*.839 2.07 3.740 2.087 2.283 1.181
fifty*twenty sixty.3*26.9 300 95 fifty seven 58 thirty
2*¾ two.375*1.059 two.07 3.740 2.244 two.283 1.181
fifty*25 60.3* 300 95 60 fifty eight thirty
two*1 2.375*1.327 two.07 three.740 two.362 2.283 one.181
65*fifteen 73*21.three 300 a hundred and ten 60 fifty eight thirty
2½*½ 2.874*.839 2.07 four.331 two.362 2.283 one.181
65*20 73*26.9 300 one hundred ten 63 fifty eight thirty
2½*¾ 2.874*1.059 2.07 4.331 two.480 two.283 one.181
sixty five*twenty five seventy three*33.7 300 110 66 fifty eight 30
2½*one two.874*1.327 2.07 4.331 two.598 2.283 one.181
65*fifteen seventy six.1*21.3 300 110 sixty one fifty eight thirty
3OD*½ 3*.839 two.07 4.331 two.402 two.283 one.181
65*twenty seventy six.1*26.9 300 one hundred ten sixty four 58 thirty
3OD*¾ three*1.059 two.07 four.331 2.520 2.283 1.181
65*twenty five 76.1*33.7 300 one hundred ten 68 fifty eight 30
3OD*one three*1.327 two.07 4.331 2.677 two.283 1.181

3.Set up Instruction for U-Bolt CZPT Tee

1. Pipe Preparation
Clear the gasket sealing surface within 16mm of the hole and inspect the sealing surface visually for defects that could prevent suitable sealing of the gasket. Never drill the hole on weld line.
2. Remove burrs
Eliminate any burrs or slug prior to installation to safeguard the gasket and stop leakage.
3. Gasket&Housing Installation
Insert the gasket into outlet housing appropriately. Align outlet housing over the pipe gap creating certain that the locating collar is in the pipe gap.
four. Alignment
Attach the U-bolt from the other side and tighten the nuts.
five. Tighten nuts
Alternatively and evenly tighten the nuts to the specified bolt torque.
six. Installation total
Proper torquing of bolts is essential to get specified functionality.
-Over torquing the bolts could result in injury to the bolt and/or casting which could consequence in pipe joint separation.
-Beneath Torquing the bolts might result in reduced strain retention capabilities, decrease bend load abilities, joint leakage and pipe joint separation. Pipe joint separation may possibly result in important home injury and critical harm.

4.Selection of merchandise

Rigid coupling, Adaptable coupling, 90° Elbow, 45° Elbow, 22.5° Elbow, eleven.25° Elbow, Tee, Decreasing Tee(Grooved/Threaded), Cross, Reducing Cross(Grooved/Threaded), Mechnical Tee(Grooved/Threaded), Mechnical Cross(Grooved/Threaded), U-bolted Mechnical Tee, Reducer(Grooved/Threaded), Grooved Eccentric Reducer, Grooved Split Flange, Grooved Adaptor Flange, Cap.

five.Item Pic

six.Production and delivery

seven.Certification and other items show


Gasket Content Temperature Assortment Recommendations  Colour
E EPDM -34ºC~+110ºC
Advocate for hot water, dilute acid, oil-free of charge gasoline and other mecmicals(apart from for hybrocarbon) within the specified temperature assortment. Not advise for petroleum and hydrocarbon. Inexperienced Strip
D NBR -29ºC~+82ºC
Advised for petroleum merchandise, gas with oil vapors, mineral oil and vegetable oil. Not advisable for substantial temperature supplies. Orange Strip
S Silicon CZPT -40ºC~+177ºC
Recommended for high temperature and dry air, and some substantial temperature chemical substances. White

Application: As one of the most well-known fittings in fireplace fighting methods, the grooved pipe fittings are commonly employed in hearth combating, air-conditioning, h2o provide, sewage, cement, oil&fuel pipeline, mine piping and normal piping supply. CZPT is spreading all over the world and successful the appreciations from end users at residence and overseas.

Locking bushings are the most handy and cost-effective technique of securing a component to a mating shaft without having the use of any specific equipment. Tapered bushings quickly align or lock a pulley, sprocket, or toothed coupling to the push shaft. Tapered bushings are already geared up with the required holes, keyways, tapped holes, and established screws, preserving time and cash in the course of machining. Tapered locking bushings are reusable soon after substitute, and EP gives not only a range of standard bushings but also custom metric or imperial bores or keyways to fulfill consumer-distinct requirements. Bushings are produced of steel or solid iron.
China Ductile Iron U-Bolted Mechanical Tee for Fire Fighting FM/UL Approved with ce certificate top quality Good price