high quality

1. Clear the shaft, the internal and outer holes of the bushing, and the inner hole of the hub. Remove any oil, paint or dust, place the bushing on the hub, and match the half holes to make entire holes (each total hole will only be threaded on 1 facet). Lightly oil the threads and factors of established screws or the threads and heads of cap screws. Loosely place the screws in the threaded holes on the hub facet. Make sure the bushing is cost-free on the hub. Snap the assembly on to the shaft and placement it in the desired position. Tighten the screws alternately and evenly right up until all are tight 5. Hammer the huge conclude of the bushing with a hammer and block or socket to steer clear of hurt. The screw can now be turned a bit to the specified torque environment. Repeat this alternating hammering and screw retightening until the specified torque is reached. Fill all holes with grease to get rid of dirt.
high quality

Tags: